Interconnecting Cisco Network Devices Part 2 Training (ICND2) v3.0

Interconnecting Cisco Network Devices Part 2 Training (ICND2)

Course Delivery

This Course is available in the following format:

Request this course in a different delivery format

GSA Schedule 70 Saving for Government Customers

Course Overview:

Interconnecting Cisco Network Devices Part 2 Training (ICND2) with Hands-on Labs

In this Interconnecting Cisco Network Devices Part 2 Training (ICND2) course, you will learn how to install, configure, operate, and troubleshoot a small enterprise network. Key additions to this latest revision include; understanding of Quality of Service (QoS) elements and their applicability, how virtualized and cloud services will interact and impact enterprise networks, along with an overview of network programmability, and the related controller types and tools that are available to support software defined network architectures.

This Interconnecting Cisco Network Devices Part 2 Training (ICND2) course will enable you to:

• Prepare for the CCNA Routing and Switching certification
• Operate a medium-sized LAN with multiple switches, supporting VLANs, trunking, and spanning tree
• Develop core routing and switching networking skills to configure, monitor, and troubleshoot Cisco networks for increased effectiveness and optimal performance within SMB and Enterprise settings
• Understand how device management can be implemented using the traditional and intelligent ways
• Support Cisco network deployments and maintain these services in an on-going operational network

Interconnecting Cisco Network Devices Part 2 Training (ICND2) – Customize It:

• We can adapt this Interconnecting Cisco Network Devices Part 2 Training (ICND2) course to your group’s background and work requirements at little to no added cost.
• If you are familiar with some aspects of this Interconnecting Cisco Network Devices Part 2 Training (ICND2) course, we can omit or shorten their discussion.
• We can adjust the emphasis placed on the various topics or build the Interconnecting Cisco Network Devices Part 2 Training (ICND2) course around the mix of technologies of interest to you (including technologies other than those included in this outline).
• If your background is nontechnical, we can exclude the more technical topics, include the topics that may be of special interest to you (e.g., as a manager or policy-maker), and present the Interconnecting Cisco Network Devices Part 2 Training (ICND2) course in manner understandable to lay audiences.

Audience / Target Group:

The target audience for this Interconnecting Cisco Network Devices Part 2 Training (ICND2) course:

• Individuals seeking the Cisco CCNA Routing and Switching certification
• Entry-level Network Engineer
• Network Administrator
• Network Support Technician
• Help Desk Technician

Interconnecting Cisco Network Devices Part 2 Training (ICND2) – Related Courses:

Interconnecting Cisco Network Devices Part 1 v3.0 Training (ICND1)
Interconnecting Cisco Network Devices: Accelerated v3.0 Training (CCNAX)

Interconnecting Cisco Network Devices Part 2 Training (ICND2) – Class Prerequisites:

The knowledge and skills that a learner must have before attending this Interconnecting Cisco Network Devices Part 2 Training v3.0 (ICND2) course are as follows:

• An understanding of networking fundamentals
• Experience implementing local area networks and Internet connectivity
• Experience managing network devices and network device security
• Experience implementing WAN and basic IPv6 connectivity
• ICND1 v3.0 – Interconnecting Cisco Networking Devices, Part 1

Interconnecting Cisco Network Devices Part 2 Training (ICND2) – Objectives:

Upon completing this Interconnecting Cisco Network Devices Part 2 Training (ICND2) course, learners will be able to meet these objectives:

• Operate a medium-sized LAN with multiple switches, supporting VLANs, trunking, and spanning tree
• Troubleshoot IP connectivity
• Describe how to configure and troubleshoot EIGRP in an IPv4 environment, and configure EIGRP for IPv6
• Configure and troubleshoot OSPF in an IPv4 environment and configure OSPF for IPv6
• Define characteristics, functions, and components of a WAN
• Describe how device management can be implemented using the traditional and intelligent ways.

Interconnecting Cisco Network Devices Part 2 Training (ICND2) – Course Syllabus:

Module 1: Implementing Scalable Medium-Sized Networks

VLAN connectivity troubleshooting
Redundant switched topologies
Spanning-tree operation
Link aggregation using EtherChannel
Layer 3 redundancy protocols
HSRP and FHRP configuration and verification

Module 2: Troubleshooting Basic Connectivity

IPv4 network connectivity troubleshooting
Guidelines for IPv4 vs IPv6
IPv6 network connectivity troubleshooting

Module 3: Implementing an EIGRP-Based Solution

EIGRP features, path selection and composite metric
EIGRP for IPv6
EIGRP common issues and detection

Module 4: Implement a Scalable OSPF-Based Solution

OSPF components
Multiarea OSPF implementation
OSPFv3 for IPv6 configuration and verification
Multiarea OSPF troubleshooting

Module 5: Wide-Area Networks

WAN topology and connectivity options
Point-to-point protocols and configuration
GRE tunnels
EBGP configuration and verification

Module 6: Network Device Management

Common access layer threat mitigation techniques
Simple Network Management Protocol (SNMP)
APIC-EM and IWAN
Cloud computing
QoS mechanisms

Interconnecting Cisco Network Devices Part 2 Training v3.0 (ICND2) – Labs:

Troubleshooting VLANs and Trunks
Configuring Root Bridge and Analyze STP Topology
Troubleshooting STP Issues
Building Redundant Switched Topologies
Configuring and Verifying EtherChannel
Improving Redundant Switched Topologies with EtherChannel
Configuring and Verifying HSRP
Troubleshooting HSRP
Implementing and Troubleshooting HSRP
Configuring and Verifying IPv4 Extended Access Lists
Troubleshooting IPv4 Network Connectivity
Troubleshooting IPv4 Connectivity
Configuring and Verifying IPv6 Extended Access Lists
Troubleshooting IPv6 Network Connectivity
Troubleshooting IPv6 Connectivity
Configuring and Verifying EIGRP
Implementing EIGRP
Configuring and Verifying EIGRP for IPv6
Configuring and Verifying Single-Area OSPF
Configuring and Verifying Multiarea OSPF
Implementing Multiarea OSPF
Configuring and Verifying OSPFv3
Implementing OSPFv3 for IPv6
Troubleshooting Multiarea OSPF
Troubleshooting OSPF
Configuring Serial Interface and PPP
Configuring and Verifying MLP
Configuring and Verifying PPPoE Client
Implementing WAN Using Point-to-Point Protocols
Configuring and Verifying GRE Tunnel
Implementing GRE Tunnel
Configuring and Verifying Single Homed EBGP
Implementing Single-Homed EBGP
Configuring External Authentication Using RADIUS and TACACS+
Configuring SNMP
Implementing Device Management and Security

Whether you are looking for general information or have a specific question, we want to help!

Request More Information

Print Friendly, PDF & Email