CCIE 360 R&S Boot Camp 2 Training v5.0 (CIERS2)

CCIE 360 R&S Boot Camp 2 Training v5.0 (CIERS2)

Course Delivery

This Course is available in the following format:

Request this course in a different delivery format

GSA Schedule 70 Saving for Government Customers

Course Overview:

CCIE 360 R&S Boot Camp 2 Training v5.0 (CIERS2) – Hands-on

CCIE 360 R&S Boot Camp 2 Training v5.0 (CIERS2) teaches learners how to use an expert-level, problem-solving process including the Options Analysis method to support complex network technologies and topologies. CCIE 360 R&S Boot Camp 2 Training v5.0 (CIERS2) course is part of a blended learning curriculum that supports expert-level preparation in routing and switching. This course has been updated to reflect the recent changes in the Cisco CCIE R&S lab that is implemented in the version 5 blueprint.

Audience / Target Group:

The target audience for this CCIE 360 R&S Boot Camp 2 Training v5.0 (CIERS2) course:

• Network engineers that need be able to use an expert-level, problem-solving process including the Options Analysis method to support complex network technologies and topologies when both configuring and troubleshooting an internetwork

• Network designers that design and support complex network technologies and topologies

Class Prerequisites:

To gain the prerequisite skills and knowledge, learners must have passed the Cisco CCIE Routing and Switching written exam.

Before taking CCIE 360 R&S Boot Camp 2 Training v5.0 (CIERS2), learners should be very familiar with the topics that are covered in CIERS1. It is also strongly recommended that learners perform two self-paced, graded assessment exams before attending this course. Learners should be able to demonstrate advanced-level competencies (knowledge and skills) that are equivalent to the following from both configuration and troubleshooting perspectives:

• Perform expert-level tasks involving WAN technologies and switched Ethernet networks
• Perform expert-level tasks involving Routing Information Protocol version 2 (RIPv2), Enhanced Interior Gateway Routing Protocol (EIGRP), and Open Shortest Path First (OSPF)
• Perform expert-level tasks for route redistribution
• Perform expert-level tasks for Border Gateway Protocol (BGP)
• Perform expert-level tasks for IPv4 multicast
• Perform expert-level tasks for IPv6 unicast and multicast connectivity
• Perform expert-level tasks for router quality of service (QoS) using the Modular QoS CLI (MQC)
• Several training courses are available through Cisco Learning Partners that are recommended to meet the prerequisites:

Cisco CCNP

• Implementing Cisco IP Routing v2.0 (ROUTE)
• Implementing Cisco IP Switched Networks v2.0 (SWITCH)
• Troubleshooting and Maintaining Cisco IP Networks v2.0 (TSHOOT)

Beyond CCNP

• Implementing Cisco Quality of Service (QOS)
• Configuring BGP on Cisco Routers (BGP)
• Deploying Cisco Service Provider Network Routing (SPROUTE)
• Deploying Cisco Service Provider Advanced Network Routing (SPADVROUTE)

What You Will Learn

Upon completing this CCIE 360 R&S Boot Camp 2 Training v5.0 (CIERS2) course, the learner will be able to meet these overall objectives:

• Perform expert-level tasks involving both configuring and troubleshooting WAN technologies and switched Ethernet networks
• Perform expert-level tasks involving both configuring and troubleshooting RIPv2, EIGRP, and OSPF
• Perform expert-level tasks for both configuring and troubleshooting route redistribution
• Perform expert-level tasks for both configuring and troubleshooting BGP
• Perform expert-level tasks for both configuring and troubleshooting MPLS Layer 3 VPNs
• Perform expert-level tasks for both configuring and troubleshooting IPv4 multicast
• Perform expert-level tasks for both configuring and troubleshooting IPv6 unicast and multicast connectivity
• Perform expert-level tasks for both configuring and troubleshooting router QoS using the MQC
• Perform expert-level tasks for both configuring and troubleshooting Cisco Catalyst 3560 Series QoS
• Perform expert-level tasks for both configuring and troubleshooting IP services

CCIE 360 R&S Boot Camp 2 Training v5.0 (CIERS2) – Course Syllabus

Module1: Formulating a Final-Phase CCIE Preparation Strategy

Differentiate an expert-level lab into well-defined subtopics
Perform mental simulations and the Options Analysis method
Test rigorously and verify Cisco IOS Software-based configurations
Formulate and apply applicable internetworking techniques

Module 2: Troubleshooting Cisco Networks

Describe an overview of the CCIE R&S troubleshooting section
Review the troubleshooting method that is outlined in the CCIE v5 blueprint
Describe an approach to forming a hands-on CCIE troubleshooting template for connectivity issues

360RSW-LAB-TA03 and 360RSW-LAB-CA03: Two Separate Sections for Troubleshooting and Configuration

Troubleshooting Section:

Incident 1: Layer 3—IP Protocol Independent Multicast (PIM) SSM
Incident 2: Layer 3—OSPF
Incident 3: Layer 2—Ethernet Switching
Incident 4: Layer 3—MP-BGP VPNv4 Redistribution
Incident 5: Layer 3—Route Targets Export and Import
Incident 6: Layer 3—IPv6 Routing
Incident 7: Layer 3—BGP
Incident 8: Security—PPP CHAP Authentication
Incident 9: Services—HSRP
Incident 10: Security—Zone-Based Firewall

Configuration Section:

Task 1: DMVPN and Serial Communications
Task 2: Switch Configuration
Task 3: IPv4 OSPF
Task 4: IPv4 EIGRP
Task 5: IPv4 RIP
Task 6: Reliable Static Routing and NAT
Task 7: Border Gateway Protocol
Task 8: IPv6 Routing
Task 9: Security
Task 10: QoS
Task 11: Address Administration
Task 12: HSRP Gateway Redundancy
Task 13: NTP Configuration
Task 14: Multicast Configuration
Task 15: SNMP

360RSW-LAB-TA04 and 360RSW-LAB-CA04: Two Separate Sections for Troubleshooting and Configuration

Troubleshooting Section:

Incident 1: Layer 3—IPSEC VPN
Incident 2: Layer 2—PPP
Incident 3: Layer 3—OSPF
Incident 4: Layer 3—EIGRP
Incident 5: Layer 3—RIP
Incident 6: Layer 3—BGP
Incident 7: Layer 3—PBR
Incident 8: Application—QoS RSVP
Incident 9: Services—GLBP
Incident 10: Security—SSH

Configuration Section:

Task 1: DMVPN and Serial Communications
Task 2: Switch Configuration
Task 3: IPv4 OSPF
Task 4: IPv4 EIGRP
Task 5: IPv4 RIP
Task 6: Border Gateway Protocol
Task 7: IPv6 Routing
Task 8: Security
Task 9: QoS
Task 10: NTP
Task 11: Cisco IOS Software Services
Task 12: Multicast
Task 13: Address Administration

360RSW-LAB-TA05 and 360RSW-LAB-CA05: Two Separate Sections for Troubleshooting and Configuration

Troubleshooting Section:

Incident 1: Layer 3—BGP
Incident 2: Layer 3—RIP
Incident 3: Layer 3—BGP Interior Gateway Protocol (IGP) Redistribution
Incident 4: Layer 3—OSPF
Incident 5: Layer 2 and Layer 3—EIGRP and Ethernet Switching
Incident 6: Layer 3—IPv6 Routing
Incident 7: Layer 3—Multicast
Incident 8: Services—Reliable Static Route
Incident 9: Services—TFTP
Incident 10: Management—EEM

Configuration Section

Task 1: DMVPN and Serial Communications
Task 2: Secure DMVPN
Task 3: Switch Configuration
Task 4: Cisco IOS Features
Task 5: IPv4 OSPF
Task 6: IPv4 EIGRP
Task 7: IPv4 RIP
Task 8: BGP
Task 9: MPLS/VPN Section
Task 10: IPv6 OSPFv3 Routing
Task 11: IPv6 EIGRP Routing
Task 12: IPv6 Connectivity
Task 13: QoS
Task 14: Gateway Redundancy
Task 15: Multicast
360RSW-LAB-TA06 and 360RSW-LAB-CA06: Two Separate Sections for Troubleshooting and Configuration

Troubleshooting Section:

Incident 1: Layer 2—PPP Multilink
Incident 2: Layer 3—OSPF
Incident 3: Layer 3—EIGRP
Incident 4: Layer 3—MPLS
Incident 5: Layer 3—BGP
Incident 6: Layer 3—IPv6
Incident 7: Layer 3—Multicast
Incident 8: Application—Accounting
Incident 9: Services—NTP
Incident 10: Security—BGP Security

Configuration Section:

Task 1: Serial and Static VTI Communications
Task 2: Switch Configuration
Task 3: VPN
Task 4: IPv4 OSPF
Task 5: IPv4 EIGRP
Task 6: IPv4 RIP
Task 7: IPv4 Redistribution
Task 8: Border Gateway Protocol
Task 9: Gateway Redundancy
Task 10: Multicast
Task 11: Traffic Administration
Task 12: Network Address Translation
360RSW-LAB-TA07 and 360RSW-LAB-CA07: Two Separate Sections for Troubleshooting and Configuration

Troubleshooting Section:

Incident 1: Layer 3—OSPF
Incident 2: Layer 3 – EIGRP
Incident 3: Layer 3— RIP
Incident 4: Layer 3—BGP
Incident 5: Layer 3—Universal IPv4 Connectivity
Incident 6: Layer 3—IPv6 Routing
Incident 7: Layer 3—Multicast
Incident 8: Services—IP SLA
Incident 9: Services—QoS and Embedded Packet Capture
Incident 10: Layer 2 and Layer 3—Backbone Connectivity

Configuration Section:

Task 1: IPsec VTI Communications
Task 2: Switch Configuration
Task 3: IPv4 OSPF
Task 4: IPv4 EIGRP
Task 5: IPv4 RIP
Task 6: IPv4 Redistribution
Task 7: Border Gateway Protocol
Task 8: IPv6
Task 9: Gateway Redundancy
Task 10: Multicast

Whether you are looking for general information or have a specific question, we want to help!

Request More Information

Print Friendly, PDF & Email